Philips HD6163 Mode D'emploi page 12

EnglisH
12
Problem
The fryer does
not work.
Food table (Fig. 22)
Cause
The type of oil or fat used
is unsuitable for deep-
frying food.
You have not cleaned
the inner bowl properly.
You have not switched on
the fryer.
You have not placed the
control panel properly.
The safety cut-out has
switched off the appliance.
Solution
Use frying oil or liquid frying fat that is suitable
for deep-frying food. Never mix different types
of oil or fat.
Clean the inner bowl as described in this user
manual.
Set the on/off switch to 'I' to switch on the fryer.
Make sure the control panel is placed correctly.
You hear a click when the control panel locks
into position.
The fuse of the temperature control may have
blown, causing the safety cut-out to switch off
the appliance. Carefully press the reset button at
the back of the control panel with a small
screwdriver. Now the appliance is ready for
use again.
If pressing the reset button does not help, go to
your Philips dealer or a service centre authorised
by Philips.