Overview; Removal Of The D-Air Street Smart Jkt From The Specifically Designed Garment; How To Wash The Garment Only; How To Wash The D-Air Street Smart Jkt - DAINESE D-AIR STREET SMART JKT.1 Notice D'utilisation

M A I N T E N A N C E
O F T H E
S T R E E T
J K T S Y S T E M
66 I N F O R M A T I V E N O T E F O R I N F L A T A B L E
D - A I R
S M A R T
P R O T E C T O R S

4.1. OVERVIEW

The D-AIR STREET SMART JKT System has
been designed and produced according to high
quality standards to ensure correct operation over
time. However, it advisable to carry out periodic
maintenance on the system, consisting of a few
simple operations.
4.2. REMOVAL OF THE D-AIR STREET SMART JKT FROM
THE SPECIFICALLY DESIGNED GARMENT
To remove the D-AIR STREET SMART JKT refer to the
instructions in Chapter 2.6.

4.3. HOW TO WASH THE GARMENT ONLY

Refer to the washing instructions inside the jacket or in the
specific informative notes.
WARNING!
Before washing the garment, after separation from the
D-AIR STREET SMART JKT, it is essential to suitably protect
the connector from water by sealing it appropriately (e.g.
with adhesive tape or with a plastic bag).

4.4. HOW TO WASH THE D-AIR STREET SMART JKT

The D-AIR STREET SMART JKT must only be cleaned
using a soft damp cloth with water or with water and a
conditioner-free neutral soapy solution.
Remove the soapy solution using a soft cloth dampened
with fresh cold water only.
Do not rub with abrasive materials and do not leave the
device to soak.
Leave the device to dry hanging, away from direct sources
of light and heat.
Also refer to the instructions and international care symbols
on the label affixed to the device, listed in the table 6 below.
D - A I R ® S T R E E T S M A R T J K T
67