DAINESE D-AIR STREET SMART JKT.1 Notice D'utilisation page 27

5
STEADY RED FLASHING INDICATES THAT A
SYSTEM ERROR HAS OCCURRED
; switch the D-AIR
STREET SMART JKT off and back on again using the switch-
on/switch-off button located on the garment in which the
System is integrated. If the error persists, connect the device
to the USB port of a computer and use the software available
on the website www.dainese.com to run system diagnostics.
FIGURE 14:
ERROR SEQUENCE, STEADY RED FLASHING
52 I N F O R M A T I V E N O T E F O R I N F L A T A B L E
Contact a Dainese technician indicating the error codes
provided by the software. The user interface will indicate a
system error with a continuous sequence of slow flashing red
lights. The VIBRAMOTOR will vibrate intermittently when the
red LED switches on.
P R O T E C T O R S
WARNING!
In the event of sudden malfunction of the D-AIR
STREET SMART JKT during use with the switch-
on/switch-off button closed, the same type of
persistent flashing will be seen. In these cases
the device might not operate, charge and run the
diagnostics.
6
Opening the switch-on/switch-off button present in
the garment in which the System is integrated starts
the System switch-off procedure. The user interface
will signal system switch-off with a rapid sequence of
red flashes for five seconds. The Vibramotor vibrates
rapidly and intermittently for five seconds during
switch-off when the red LED switches on.
FIGURE 15:
SWITCH-OFF SEQUENCE (5 SEC) OR SUDDEN ERROR,
FAST RED FLASHING
D - A I R ® S T R E E T S M A R T J K T
53