Installing The Indoor Unit - Haier AC35S2SG1FA Mode D'emploi

Installation Procedure

INSTALLING THE INDOOR UNIT

Connection pipe requirement
Model
Liquid side
AC35S2SG1FA
AC50S2SG1FA
AC71S2SG1FA
AC90S2SH1FA
AC105S2SH1FA
AC125S2SK1FA
AC140S2SK1FA
Install the room air conditioner as follows
1. Remove the intake grill and side cover
(1) Open the intake grill
(2) Remove the Side cover(Right and left side)
(3) This air conditioner can be set up to intake fresh air. The information about how to install for fresh-air intake, refer to "Fresh air
intake".
Air filter
Open the intake grill
(1) Push the embeding switch according to the direction of the arrowhead.(Refer to Fig.1)
(2) Turn into the intake grill according to the direction of the arrowhead.(Refer to Fig.2)
Remove the Side cover
(1) Remove the screw.
(2) Push the Side cover according to the direction of the arrowhead.
(3) Then remove the Side cover.
Diameter
Gas side
6.35mm 9.52mm
6.35mm 12.7mm
9.52mm 15.88mm
9.52mm 15.88mm
9.52mm 15.88mm
Fig. 1
Fig. 2
Side cover
screw
Maximum height
Maximum length (between indoor
and outdoor)
15m 10m
20m 10m
20m 10m
30m 20m
50m 30m
Intake grille
23
Side cover A Side cover A (Left
(Right side) side)