Move And Scrap The Air Conditioning - Haier AC35S2SG1FA Mode D'emploi

Cautions
Specifications
y The refrigerating circuit is leak-proof.
y For all the models in this manual, the all-pole discon-nexion connection method should be applied in the power supply. Such
means for disconnection must be incorporation in the fixed wiring.
Temperature and Humidity Range
Indoor temperature
Cooling
Outdoor temperature
Indoor temperature
Heating
Outdoor temperature
y If the air conditioner is used under higher temperature condition than those listed, the built-in protection circuit may operate to
prevent internal circuit damage. Also, during Cooling and Dry modes, if the unit is used under conditions of lower temperature
than those listed above, the heat-exchanger may freeze, leading to water leakage and other damage.
y Do not use this unit for purposes other than cooling, heating, dehumidifying and ventilation of rooms in ordinary dwellings. The
wiring method should be in line with the local wiring standand.
y The waste battery should be disposed properly.
y If the fuse on PC board is broken, please change it with the type T 3.15A/250VAC.

Move and scrap the air conditioning

y When moving, to disassemble and re-install the air conditioning, please contact your dealer for technical support.
y In the composition material of air conditioning, the content of lead, mercury, hexavalent chromium, polybrominated biphenyls
and polybrominated diphenyl ethers are not more than 0.1%(mass fraction) and cadmium is not more than 0.01% (mass
fraction).
y Please recycle the refrigerant before scrapping, moving, setting and repairing the air conditioning; for the air conditioning
scrapping, should be dealt with by the qualified enterprises.
32/23 °C
max. DB/WB
18/14 °C
min. DB/WB
46/26 °C
max. DB/WB
10/6 °C
min. DB/WB
27 °C
max. DB/WB
15 °C
min. DB/WB
24/18 °C
max. DB/WB
-15 °C
min. DB/WB
10