Step 5 - Connect Exhaust Hose To The Air Conditioner; Step 6 - Complete Installation; Buttons - Haier HPP08XCR Guide De L'utilisateur

INSTALLATION INSTRUCTIONS
STEP 5 - CONNECT EXHAUST HOSE
TO THE AIR CONDITIONER
IMPORTANT: When connecting the hose, the air conditioner
must be close enough to the window that you will not
dislodge the window seal plate. Once the hose is connected,
move the air conditioner 20" (51 cm) from the wall.
1.
2. Aim the opening of the hose to the air exhaust outlet and
push it hard straight into the outlet until it clicks.
CONTROL PANEL

BUTTONS

TIMER BUTTON
A
Program a time from (1-hour to 24-hours) for the air
programmed, the Timer indicator light will illuminate.
While the air conditioner is operating:
1. Press the Timer button.
2. Press the Up/Down arrow buttons to select the number
of hours you want the air conditioner to continue to
NOTE:
time to be saved.
A B C D E
Timer High Low Water Full Cool
7

STEP 6 - COMPLETE INSTALLATION

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power
cord plug.
Do not use an adapter.
Do not use an extension cord.
electrical shock.
1. Plug the power cord into a grounded 3 prong outlet.
2. Press the Reset button on the power cord to ensure the
safety plug is providing power to the air conditioner.
F G
°C
Hr
°F
Fan Dehum Sleep POWER
While the air conditioner is o:
1. Press the Timer button.
2. Press the Up/Down arrow buttons to select the number
of hours you want the air conditioner to remain o before
turning On.
NOTE: Wait approximately 5 seconds for the Turn-On
time to be saved.
To cancel the timer:
•
Press the Timer button once, the hours remaining will
canceled.