Step 4 - Connect Exhaust Hose To The Air Conditioner; Step 5 - Complete Installation - Haier AM09AA1TAA Mode D'emploi

A
B
STEP 4 - CONNECT EXHAUST HOSE
TO THE AIR CONDITIONER
IMPORTANT: When connecting the hose, the air
conditioner must be close enough to the window that
you will not dislodge the window seal plate. Once the
hose is connected, move the air conditioner 51 cm from the
wall.
1.
Align the notches on the connector end of the exhaust
hose with the ridges in the opening on the back of the
air conditioner.
2. Using a counterclockwise motion, screw the exhaust
hose (connector end) into the air outlet located on the
back of the air conditioner.

STEP 5 - COMPLETE INSTALLATION

WARNING
Electrical Shock Hazard
Plug into a grounded outlet only.
Do not remove the ground contacts from the
power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire or electrical shock.
A
Exhaust pipe assembly
B
Window panel
6