Dometic CAM 1000 Instructions De Montage Et De Service page 10

Connecting the CAM1000 / BSC01
I
NOTE
• In Germany and Austria, special requirements apply for the operation to fulfill the
operating licence.
• CAM1000 / BSC01 may only be operated with the M75LXAHD monitor.
Key for circuit diagram
No. Designation
1 Green connection plug:
2 Yellow connection plug:
3 Red/black wire:
4 Red wire:
5 Green wire:
6 White wire:
6.1
7 Black wire:
8 Yellow / orange wires (to
use this trigger wire as a
loop 2 cables with colour
yellow/orange are needed):
9 Blue wire:
10
Description
Audio output to loudspeaker
CVBS video output
Buzzer for acoustic signal
Connection to ignition (ACC) 12 V/24 V
R = reverse gear 12 V/24 V
Optical indication of objects
Warning sound inactive
Left turn signal < 10 seconds:
– Optical indication of objects
– Warning sound inactive
A blue square appears on the screen.
Warning sound switches active
– After 3 minutes
– Speed > 40 km/h
Left turn signal > 10 seconds:
– Optical indication of objects
– Warning sound inactive
A blue square appears on the screen.
Warning sound switches active
– With turn off of the left turn signal
Connection to ground
Cable loop for activation of operation mode A or B:
Loop open = operating mode A (165° view)
Loop closed = operating mode B (140° view)
GPS output 12 V/24 V for switching on the monitor (blue
line) (C3)
CAM 1000 / BSC 01
EN