Random Playback; Intro Playback; Select Repeat Play Options; Aux Operation - SilverCrest SMS 50 A1 Instructions D'utilisation Et Consignes De Sécurité

Random playback

During music playback, press the SHUFFLE button
repeatedly on the remote control to select a shuffle
option play mode. The selected mode will show on
the display:
• SHUF FLE: After all the tracks have
been played once, the playback will stop
automatically.
• SHUF OFF: Normal playback will resume.

Intro playback

During music playback, press the INTRO button
on the remote control. The unit will play the first 10
seconds of each track. Press the INTRO button
on the remote control again to resume normal
playback.

Select repeat play options

During music playback, press the REPEAT button
repeatedly on the remote control to select repeat
play modes. The selected mode will show on the
display.
• RPT ONE: Repeat current track.
• RPT ALB: Repeat the track in the folder (if a
folder is displayed).
• RPT ALL: Repeat all tracks.
• RPT OFF: Repeat turned off.
Repeat A-B
1. During music playback, press the A-B button
at the start point.
2. Press the A-B button at the end point.
The selected section starts to play repeatedly.
To cancel repeat play, press the A-B button again.
Note:
The section A and B can be set only within the
same track/title.
40 GB/IE
Program
The user can programme up to 20 tracks in CD/
USB mode in any desired order. If more than 20
tracks are stored, "FULL" appears in the display.
1. Press the button on the remote control.
2. Press the PROG button on the remote control
to enter MEMORY mode.
3. Press the number (0-9) or
the remote control to select the track that you
want to preset, then press PROG or ENTER
button on the remote control to confirm.
4. Repeat step 3 to programme more track.
5. Press the button on the unit or the
on the remote control to playback programme
tracks.
Each activated state will be cleared if any buttons
are not pressed within 20 seconds or press the
button.
Note:
• To delete a program, press the
"PRG CLR" appears in the display.

AUX operation

1. Ensure that the unit is connected to the TV or
audio device.
2. Press the SOURCE button on the main unit or
press the AUX button on the remote control to
select AUX mode.
3. Operate your audio device directly for
playback features.
4. Press the VOL +/– button to adjust the
volume to your desired level.
/ buttons on
button
button twice.