Connections; Connect To An External Device - SilverCrest SMS 50 A1 Instructions D'utilisation Et Consignes De Sécurité

Connections

Connect to speakers
Note:
• For optimal sound, only use the supplied
speakers.
• Connect only speakers with impedance that is
the same or higher than the supplied speakers.
• Refer to the specifications section of this
manual.
• Insert the speaker plugs to SPEAKER OUT
(L/R).
Plug the right speaker to R. Plug the left
speaker to L.

Connect to an external device

You can also listen to an external audio device
through this unit.
A: Use a RCA to RCA audio cable (not included)
to connect the TV's audio output sockets to the
AUX(R L) socket on the unit.
B: Use the RCA to 3.5 mm audio cable (included)
to connect the MP3 player's headphone
socket to the AUX(R L) socket on the unit.
Connect the aerial
Connect the supplied FM wire antenna to the
FM ANT socket on the unit. Position the aerial to
obtain optimum reception.
To avoid noise, keep the antenna away from the
unit's connecting cord and AC power cord.
36 GB/IE
1
SPEAKER(R)
FM ANT
2 3
SPEAKER(L)
B A