Connect Power; Basic Operation; Adjust The Volume; Volume Memory - SilverCrest SMS 50 A1 Instructions D'utilisation Et Consignes De Sécurité

Connect power

Caution:
• Risk of product damage! Ensure that the
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
• Before connecting the AC power cord, ensure
you have completed all other connections.
• Connect the AC power cord to the wall
socket.
• Please turn the unit off completely to save
energy when not in use.

Basic operation

Standby/ON
• When you first connect the unit to the mains
socket, it will be in STANDBY mode and the
power indicator will illuminate red.
/STANDBY button on the main
• Press the
unit or on the remote control to switch the main
unit ON.
• Press the /STANDBY button on the main
unit or the on the remote control to switch
the main unit back to STANDBY mode.
"STANDBY" is displayed.
• Disconnect the mains plug from the main socket
if you want to switch the unit off completely.
Note:
• When turning the system on, the system will
continue in the mode it was in when it was last
turned off.
• If the system is unplugged or if a power failure
occurs, all setups of the unit will be erased.
Once setups have been erased, re-setup all
items ( tuner stations, Source... ) whichever you
desire.
• When there is no input signal (or weak input
signal) in AUX/Bluetooth/USB and when
a CD is not playing (No disc, Stop or Pause)
for over 15 minutes, the unit will automatically
switch to STANDBY mode.
Select modes
To get to the desired function mode, press the
SOURCE button repeatedly on the unit or press
the CD, USB, TUNER, AUX, BT (Bluetooth)
buttons on the remote control to select the desired
mode.
Adjust the bass
Press the BASS+/- button on the remote control
to select a preset sound effect: Bass 0, Bass 1,
Bass 2.

Adjust the volume

• Press the VOL +/– buttons on the remote
control or turn the VOLUME +/- control on
the unit to adjust the volume.
• To turn the sound off, press the
the remote control. Press the
or press VOL+/- button on the remote control
or turn the VOLUME +/- control on the unit to
resume normal volume.

Volume memory

• If the last used volume is lower than level 5, the
default volume will be set to level 5.
• If the last used volume is between level 5
and 12, the last used volume will be stored
automatically as default volume.
• If the last used volume is over level 12, the
default volume will be set to level 12.
button on
button again
GB/IE 37