Publicité
Les langues disponibles
Les langues disponibles
Time setting
Pull the crown to position 2. This will stop the movement.
To ensure that the set time is accurate to the second,
it is best to stop the movement as the seconds hand
reaches 60. You can now position the minute hand
exactly on the minute line. To start the seconds hand,
push the crown back to position 0. When setting the time,
please be aware that the date change always takes place
at midnight (24.00). If this change has already taken
place at 12.00 noon, you must move the hands forwards
by 12 hours.
Setting your watch correctly
Set your watch correctly as follows:
• Release the crown by rotating it to the left.
• Wind the movement until it is fully wound
(about 30 revolutions of the crown).
• Pull the crown to position 1.
• Rotating the crown to the right causes the date
indicator to change in steps. Set yesterday's date.
• Rotating the crown to the left causes the day
indicator to change in steps. Set yesterday's day.
• Pull the crown to position 2, and this will stop the
movement.
Publicité
