Publicité
Les langues disponibles
Les langues disponibles
Winding position
22 | 23
In the winding position (position 0), you can also wind
the automatic movement by hand. The movement will
start after only a few revolutions of the crown. However,
it is better to wind the movement fully with about
30 revolutions of the crown, as maximum accuracy and
a power reserve of about 44 hours will then be assured,
even after taking off the watch.
Date and day setting
If a month has fewer than 31 days, you must set the date
by hand to the first day of the following month. To do
this, release the screw-in crown and pull it to position 1.
You can now change the date by rotating the crown to
the right, and the day by rotating it to the left (quick set-
ting). You should not perform quick setting in the period
between 20.00 and 2.00, since the date is moved for-
wards automatically by the movement during this period
and the change mechanism could be damaged.
Publicité
