Heatsail DISC CANTILEVER Manuel page 23

EN
S T E P 2 4
Look for the ground stud with the
grounding symbol.
(shown at right)
Attach the two grounding wires
(green and yellow) from the tube
and from the control box to the
stud, layering the lock washers
and wires as shown. Fasten with
the supplied M6 nut, using M10
wrench or socket.
S T E P 2 5
Insert the control box into
the opening. Fasten with the
supplied M4 nuts.
Lower the cover box over the
metal box, securing the control
box behind the cover.
Manual 23