Heatsail DISC CANTILEVER Manuel page 14

EN
S T E P 4
Remove the lid of the metal box.
The box with the hardware is
inside.
S T E P 5
Take the metal box. Position so
that the opening is on the far side.
NOTE: Before continuing, be sure
you place the metal box where
you want the DISC installed for
permanent mounting.
S T E P 6
Identify the two holes. Insert an
M6 button head screw into the
the bottom hole of the tube, but
DO NOT tighten it fully at this
time.
14
1x
Heatsail DISC® CANTILEVER