Heatsail DISC CANTILEVER Manuel page 22

EN
S T E P 2 1
Tighten all the cable gland to
prevent ingress of the elements.
S T E P 2 2
Tighten the M6 screw on the
tube. (See STEP 6)
S T E P 2 3
Drill a hole in the mounting
surface and anchor your DISC
with the correct supplied floor
screws according to the surface
material.
NOTE: We have provided an
assortment of floor screws for the
most common surface materials.
If the supplied hardware is not
suitable for your surface, please
contact your local
supplier.
22
hardware
Heatsail DISC® CANTILEVER