Inserting A Battery - Panasonic RR-US310 Mode D'emploi

Inserting a battery

Open the battery cover (
1 AAA LR03 battery (not supplied)
Make sure and are correctly placed.
Close the battery cover
➜
(
4
● Use an alkaline battery.
● Remove the battery from the unit when you will not use
the unit for a long period of time.
➜
)
1 2
Battery
cover
)
5
The remaining battery level is indicated as shown
below while the unit is operating.
● If the battery runs out, "
Replace the battery as soon as possible.
● When the battery runs out of power, "
indicated and then the power turns off automatically.
● Depending on the battery state and the operation to be
performed, the unit may operate even after the power
has been turned off automatically. However, note that
the unit may suddenly turn off during operation due to
insufficient battery power.
● A certain level of battery power is required to delete
files, format the unit ( ➜ page 13) or divide files
( ➜ page 26). If any of these operations are performed
when the battery indicator is "
will be turned off because the battery will run out of
power.
● Turn the power off before removing the battery.
• If the battery is removed while the power is on, data
may be lost or the unit may be damaged.
Set the time after inserting a battery for the first time or
replacing the battery. ( ➜ page 9)
Blinking
" blinks.
" is
" (blinking), the power
7
7