Using Sound Effects; Reducing Noise During Playback; (Noise Cancellation); Adjusting Sound Level Automatically - Panasonic RR-US310 Mode D'emploi

Using sound effects

This unit has the function that gives sound effects to the playback sound. The sound effects include
the noise cancellation, sound level adjustment, chorus playback and equaliser.
You can select only one sound effect. If any of the effects is set, the other sound effects will not work.

Reducing noise during playback

(Noise cancellation)

This function reduces noise during playback to
allow target sound to be heard clearly. Sound is
played back in monaural.
• When the unit is not in the stop state, press
• Select "MIC" folder beforehand. (➜ page 10)
1
2
3
4
FOLDER
To exit the setting screen, press [g STOP/RETURN].
22
22
[g STOP/RETURN].
Press [MENU/FOLDER].
Press u, i to select
"NC" and "EQ EFFECT",
and press [q OK].
Press +, – to select "
Press +, – to select "
and press [q OK].
: Reduce noise slightly.
: Reduce noise greatly.
(NC : Noise Cancel)
"NC" is displayed.

Adjusting sound level automatically

This function adjusts the sound level when the sound
volume greatly differs between loud sound and small
sound and the small sound is difficult to hear.
• When the unit is not in the stop state, press
• Select "MIC" folder beforehand. (➜ page 10)
1
2
3
" and press [q OK].
4
" or " "
To exit the setting screen, press [g STOP/RETURN].
[g STOP/RETURN].
Press [MENU/FOLDER].
Press u, i to select "NC" and
"EQ EFFECT", and press [q OK].
Press +, – to select "
press [q OK].
Press +, – to select "
and press [q OK].
: Adjust the volume slightly.
: Adjust the volume greatly.
(SLC : automatic Sound Level Control)
"EFFECT" is displayed.
" and
" or " "