Switching Microphone Sensitivity; Reducing Low Frequency Noise During Recording - Panasonic RR-US310 Mode D'emploi

Switching microphone
sensitivity
Switch the microphone sensitivity according to the
volume of the sound source. When the sound source
volume is loud, set the sensitivity to " " (LOW).
When it is low, set the sensitivity to " " (HIGH).
• When the unit is not in the stop state, press
1
2
3
To exit the setting screen, press
[g STOP/RETURN].
FOLDER
16
16
[g STOP/RETURN].
Press [MENU/ FOLDER ].
Press u, i to select "
press [q OK].
Press +, – to select "
and press [q OK].
: Sets the microphone sensitivity to the
high level.
: Sets the microphone sensitivity to the
low level.
(The factory setting is " ".)
Reducing low frequency
noise during recording
Sound of low frequency range is reduced
during microphone recording. This is effective
when reducing noise of air conditioner during
recording at a meeting, etc. (LOW CUT FILTER)
• When the unit is not in the stop state, press
[g STOP/RETURN].
1
Press [MENU/FOLDER].
Press u, i to select "
" and
2
and press [q OK].
" or " "
3
Press +, – to select "
[q OK].
(The factory setting is "
To exit the setting screen, press
[g STOP/RETURN].
● Using LOW CUT FILTER cuts the sound of
low frequency range. This may help reduce
the wind-cutting sound.
"
" and press
".)