Phoenix Mecano RK ROSE+KRIEGER DuoLine S Notice D'assemblage page 71

Synchroniser shaft RK DuoLine Z 80, 160
The adaptation of a synchroniser shaft is necessary for the backlash-free transmission of torques
with linear units arranged in parallel. As with the motor, this can be fixed to the steering unit with
couplings, depending on the version. Bridgeable distances depend on the speed and size. Please
observe the diagram Deflection-critical speeds during the application-specific design:
Maximum transmittable torque
RK DuoLine Z 60
RK DuoLine Z 80
RK DuoLine Z 120
RK DuoLine Z 160
Overall length [mm]
Overall length
Clearance between the linear units
28 Nm
67 Nm
141 Nm
220 Nm
7. Life Phases 7. Life Phases 7. Life Phases
71 71 71