General Notes; Notes On These Assembly Instructions - Phoenix Mecano RK ROSE+KRIEGER DuoLine S Notice D'assemblage

2.1 Notes on these assembly instructions

These assembly instructions are only applicable to the linear units described and are intended as
documentation for the manufacturer of the end product into which this partly completed
machine is incorporated.
We wish to explicitly point out that the manufacturer of the end product must produce an
operating manual for the end user containing all the functions and hazard warnings of the end
product.
This applies equally to the integration into a machine. In this case, the manufacturer of the
machine is responsible for the relevant safety devices, checks, monitoring potential crushing and
shearing points and the documentation.
These assembly instructions will help you
•
Avoid hazards,
•
Prevent down time,
•
and guarantee and increase the working life of this product.
Hazard warnings, safety regulations and the information in these assembly instructions are to be
observed without exception.
These assembly instructions must be read and applied by everyone who works with the product.
Commissioning is forbidden until the machine complies with the provisions of EC Directive 2006/
42/EC (Machinery Directive). Before bringing onto the market, this must comply with the CE
Directives, including documentation.
We hereby advise any re-user of this partly completed machine / part machine / machine parts
explicitly of the obligation to expand and complete this documentation. In particular when
installing or attaching electrical components and / or drives, the re-user must draw up a CE
declaration of conformity.
Our declaration of incorporation becomes invalid automatically.

2. General Notes

2. General Notes 2. General Notes
51 51 51