Phoenix Mecano RK ROSE+KRIEGER DuoLine S Notice D'assemblage page 50

1. Declaration of Incorporation 1. Declaration of Incorporation 1. Declaration of Incorporation
Sources for the harmonised standards according to Article 7, Paragraph 2
EN ISO 3744:2010
EN ISO 13857:2008
EN ISO 12-100:2010-11:
The manufacturer or the person authorised are obliged to hand over the special documents for
the partially completed machine to the national authorities on reasoned request. This transfer is
carried out in agreement, in electronic or paper format.
The commercial protective rights remain unaffected by this.
Important note! The partially completed machine must only be put into operation once, if re-
quired, it has been determined that the machine in which the partially completed machine is to be
installed complies with the regulations of this guideline.
Minden / 16.07.2014
Place / Date
Minden / 16.07.2014
Place / Date
50 50 50
Acoustics – Determination of sound power levels and sound energy levels
of noise sources using sound pressure - Enveloping surface methods of
accuracy class 2 for an essentially free field over a reflecting plane.
Machine safety – safety distances to prevent hazard zones being reached
by upper and lower limbs.
Safety of machinery – General principles for design – Risk assessment and
risk reduction.
Signature
Signature
Technical Manager
Signatory information
Managing Director
Signatory information