Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
Using AC power
Connect the AC adaptor and USB charging cable to the unit.
· Slide the power switch to "ON" position then press the STANDBY button in 2 secs.
· The display will light and the unit will switch on.
To turn the unit in STANDBY mode:
· Press the STANDBY button. The clock will continue to run whilst mains power is
connected.
Using battery power
Charging the battery.
· Slide the power switch to "ON" position.
Connect the USB cable to the adaptor, then connect the one end of charging cable to DC
input jack. Display will show
· Slide the power switch to "ON" position then press the STANDBY button.
· The display will light and the unit will switch on.
To turn the unit in STANDBY mode:
· Press the STANDBY button and the display will be switch off completely.
Note: The clock will not continue to run when using DC power.
Battery power indication will be appear on LCD display.
This device is equipped with an AUTOMATIC SWITCH OFF / STANDBY SYSTEM for energy-
saving requirements. This is regulated by an EU-standard and is NOT A MALFUNCTION.
3

POWER CONTROL

ENERGY SAVING/ ERP2 REGULATION
DAB650SI / English Instruction Manual

Publicité

Table des Matières
loading

Table des Matières