Sony MSAC-FD1B Mode D'emploi page 10

Using MSAC-FD1 (continued)
* After [MSAC-FD1 Utility] starts, insert MSAC-FD1.
If the application does not start, the menu below appears.
Always press [Eject] when this menu displays. Then repeat the steps
above from the beginning.
Do not select [Initialize]. Selecting [Initialize] will cause the
computer to crash.
3
Insert Adaptor
When the startup menu appears, insert MSAC-FD1 into the floppy
disk drive. Check to make sure "Memory Stick" is correctly attached.
10-US