Symbols Used In The Manual; Preparation Of The Machine - Facom 740A Notice Originale

FOREWORD
This is a device designed for correct beam alignment of any type of automobile or motor vehicle headlight. The machine must
be used for this purpose only. Even the finest of machines can function properly and ensure profitable service only if it is used
correctly and kept in the best possible condition. For this reason, we ask you to read this manual with care and to reread it
whenever difficulties should arise in using the machine. In case of need, we remind you that our service centers, organized in
cooperation with our retailers, are always at your disposal for any advice you may need.
NOTE: the manufacturer may decide to make changes in the device without notice, in order to adapt it to technological
advances and specific production or installation needs. Therefore, even if the illustrations shown in the manual differ slightly
from the machine in your possession, the safety and instructions about it are guaranteed.
TECHNICAL DATA
Width
Lenght
Height
Weight
Power supply for digital display
model
Unity of intensity measurement
Vertical deviation
Horizontal orientation
Packaging dimensions
Packed product weight

SYMBOLS USED IN THE MANUAL

Warning symbol
Read the sections preceded by this symbol with particular care, for the safety of the operator and the machine.
Laser beam
Read with care warnings with this symbol for operator safety and machine safety.
Pay attention of all warning symbols on the products, keep wholly stickers and fully readable.

PREPARATION OF THE MACHINE

CONTENTS OF THE PACKAGE
1 base
1 column (2 parts)
1 sliding system
1 visor
1 carton containing:
- an optical chamber with 2 screws for fastening the structure
- a package containing 4 screws and 4 nuts for fastening column to the structure
- manual for use and maintenance
- conformity certificate
If you receive erroneous parts, or notice shortages or damage, contact the distributor. Keep the package, including the original
packing material, in case you need to send the product for repairs.
NU-740.A_0617.indd 9
U/M
mm
mm
mm
kg
V d.c.
klux/1m
kcd
lux/25m
%
cm/10m
cm (BxLxH)
kg
580
712
1810
20
9
0-150
0-150
0-240
0 - 4
+/-5
80x60x50
22
27/06/2017 10:41:48
EN
9