Supplementary Instructions - Facom 740A Notice Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1

SUPPLEMENTARY INSTRUCTIONS

REPLACEMENT OF LASER VISOR BATTERIES
Unscrew the two screws on the cover of the laser visor and replace the 3 penlight batteries size AA 1.5V, respecting the correct
polarity, close the visor and fasten the cover with the screws provided. (FIG.31)
BATTERIES REPLACEMENT
If it is necessary to replace the battery of the headlight tester, proceed as follows:
Use a Phillips screwdriver to remove the screw fastening the battery support to the bottom of the optical box.
Remove the support and take the battery out, take off the connector and replace the battery.
Reassemble, proceeding in reverse order performing the operations described for disassembly. (FIG.32, FIG.33 & FIG.34)
CLEANING AND MAINTENANCE
The machine does not require particular maintenance other than normal cleaning with a damp cloth (water or normal
detergent).
CAUTION! Do not use nitro solvents.
DEMOLITION AND DISPOSAL
The machine is mainly composed of steel.
Other parts:
- in plastic, the optical box and some parts
- in aluminum, the column
- in cardboard and paper, packing and documents.
Part of the machine is painted with scratch-resistant epoxy powder.
In disposing of the machine, comply with the provisions of the local authorities.
WARRANTY
Facom products are guaranteed for 24 months from the date of purchase against any defect or manufacturing fault.
Facom accessories and wear parts, charger and batteries are covered by the legally enforced guarantee.
This guarantee does not cover the following cases: normal wear, non compliance of instructions of use and safety guidelines,
non-conventional or abusive use of the tool, tool overloading, lack of servicing or maintenance, intrusion of foreign bodies,
tools which have been disassembled or modified, or featuring traces of shock (dents, cracks or broken covers...), use with poor
quality or non compatible accessories.
To use the guarantee, provide: the tool with its serial number as well as the legible and unmarked original invoice designating
the product and its date of purchase.
Detailed conditions of application of the guarantee: call your distributor.
NU-740.A_0617.indd 13
13
27/06/2017 10:41:49

Publicité

Table des Matières
loading

Table des Matières