Timer Function; Setting The Off Timer - Boneco P700 Mode D'emploi

26

TIMER FUNCTION

en
TIMER FUNCTION
The timer function lets you determine how long the
BONECO P700 should run before it switches off auto-
matically (OFF timer).
Alternatively, you can specify a time when the appliance
switches on automatically (ON timer). Use this function,
for example, to activate the BONECO P700 before you
return home, so that you have the perfect room climate
waiting for you.
The maximum duration of the timer is 12 hours.

SETTING THE OFF TIMER

1. Switch on the BONECO P700 using the
2. Select the desired fan power or
3. Press the button repeatedly to set the duration
of the operation (1 to 12 hours).
The remaining time is shown on the display for 3 seconds.
The fine particle pollution and the
displayed again. The appliance then runs for the speci-
fied period and then switches itself off, in this example,
after 5 hours.
4. To deactivate the OFF timer early, press the
ton or press the button again and select
SETTING THE ON TIMER
button. 1. Select the desired fan power or
mode. 2. Switch off the BONECO P700 using the
3. Press the
(1 to 12 hours) until the start.
The remaining time until the start is shown on the display
icon are then for 3 seconds. Afterwards, the fine particle pollution and
the icon are displayed again. The BONECO P700
switches on after the timer expires and operates with the
selected program, in this example, after 12 hours:
but- 4. To deactivate the ON timer early, press the
. ton or press the
mode.
button.
button repeatedly to set the period
but-
button again and select .