Boneco P700 Mode D'emploi page 21

Masquer les pouces Voir aussi pour P700:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
FILTER WARNING AND FILTER CHANGE
"FILTER WARNING" INDICATOR
The
icon signals that both filters are used up and have
to be replaced so that the BONECO P700 maintains opti-
mum effectiveness.
This icon is shown after approximately one year of operat-
ing. The effective usage time varies with the air pollution
and the associated fan power. The BONECO P700 auto-
matically takes these values into account
Operation stops as soon as your remove the cover. The
appliance only continues running again after you have put
the cover back on. All settings are retained during the
interruption. However, the timer cntinues to run during
this time.
SOURCE OF SUPPLY
You can obtain the replacement filters from your
BONECO specialist dealer or at the online store at
www.shop.boneco.com. Both filters are always con-
tained in a set.
REPLACING THE FILTER
1.
Take off the filter cover.
2. Take the used filter out of the appliance by pulling on
the two tabs simultaneously.
3. Remove the protective foil.
4. Place the new filter into the housing. Make sure the
filter is parallel to the appliance.
5. Reattach the filter cover.
6. Replace the second filter the same way.
7.
Dispose of the used filters together with your house-
hold waste.
CLEARING THE FILTER WARNING
The
icon does not go out automatically after the filter
has been replaced. Press and hold the
seconds to hide the symbol. This also resets the counter
for the new filter at the same time.
21
en
button for five

Publicité

Table des Matières
loading

Table des Matières