Precisely Calibrating The Listening Position - Intelligent Time Alignment Tune - Sony MEX-DV2200 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

By the visual setup menu
1
Press (VISUAL SETUP) while the unit is
off.
The visual setup menu appears.
2
Press M/m to select
SETUP), then press (ENTER).
The audio setup items appear.
3
Press M/m to select "POSITION
SELECT," then press (ENTER).
The options appear.
AUDIO SETUP
SUPER AUDIO CD MODE:
SUPER AUDIO CD LAYER :
POSITION SELECT :
AUDIO DRC :
5.1CH OUTPUT :
PRO LOGIC II :
4
Press M/m to select the desired option,
then press (ENTER).
The setting is complete.
Note
Intelligent Time Alignment is deactivated while the
karaoke mode (page 32) is activated, or "SUPER
AUDIO CD MODE"/"SA-CD MOD" is set to "HQ"
(page 44, 48).
Tip
The setting in sound menu will switch the setting in the
visual setup menu automatically, and vice versa.
38
Precisely calibrating the listening
position — Intelligent Time
Alignment Tune
You can precisely calibrate your listening
(AUDIO
position from each speaker so that the sound
delay reaches the listener more correctly.
The setting is configurable both from the visual
setup menu (page 41) and the system setup menu
(page 45).
Before starting, measure the distance between
your listening position and each speaker.
HQ
MULTI
By the visual setup menu
FRONT L
OFF
1
FRONT
ALL
FRONT L
FRONT R
2
To return to the previous display, press O.
To hide the visual setup menu, press
(VISUAL SETUP).
Note
If a center speaker is not connected, ignore its setting.
From the visual setup menu, select
(AUDIO SETUP) c "POSITION
SELECT" c "CUSTOM," then press
(ENTER).
For details on this procedure, see "Optimizing
sound for the listening position — Intelligent
Time Alignment" on page 37.
The speaker list appears.
AUDIO SETUP
CENTER
CENTER
100cm
FRONT LEFT
100cm
FRONT RIGHT 100cm
REAR LEFT
100cm
REAR RIGHT
100cm
Set the distance between your
listening position and each speaker.
To select the speaker, press M/m and
(ENTER).
To adjust the distance, press M/m, and to
confirm, press (ENTER).
The distance is adjustable in 2 cm (
steps, between 0 and 400 cm (0 and 13
13
/
in)
16
1
/
ft).
10

Publicité

Table des Matières
loading

Table des Matières