Audio Setup; Audio Drc - Sony MEX-DV2200 Mode D'emploi

Audio setup

(AUDIO SETUP), then select the desired item and option below, using M/m and (ENTER).
Select
For details on this procedure, see "Basic operation of visual setup" on page 41.
Follow the page reference for details. "z" indicates the default setting.
Item
SUPER AUDIO CD MODE
(page 35)
Selects the sound quality for Super
Audio CD playback.
SUPER AUDIO CD LAYER
(page 34)
Selects the playback layer (area) of
a Super Audio CD.
POSITION SELECT (page 37)
Sets the listening position to obtain
the feeling of being in the center of
the sound field wherever you sit in
the car.

AUDIO DRC

Makes the sound clear when the
volume is low. Only for a DVD
conforming to Audio DRC
(Dynamic Range Control).
5.1CH OUTPUT
Switches the method of outputting
5.1-channel sources.
PROLOGIC II (page 32)
Outputs 2-channel sources in
multi-channel.
* Excluding DVD-R/DVD-R DL/DVD-RW in VR mode.
44
Option
HQ (z)
STD
MULTI (z)
2CH
CD
OFF (z)
FRONT
ALL
FRONT L
FRONT R
CUSTOM
STANDARD (z)
*
WIDE RANGE
5.1CH (z)
DOWNMIX
OFF (z)
MUSIC
MOVIE
Purpose
To have high sound quality.
To have standard sound quality.
To play multi-channel area in the
Super Audio CD layer.
To play 2-channel (stereo) area in
the Super Audio CD layer.
To play CD layer (if contained).
To not set the listening position.
To set to center front.
To set to the center of your car.
To set to front left.
To set to front right.
To precisely calibrate the listening
position (page 38).
To select the standard setting.
To obtain the feeling of being at a
live performance.
To output in 5.1 channels.
To downmix to 2 channels.
To deactivate the Pro Logic II
mode.
To create deep, wide sound for
stereo audio recordings.
To enhance the sound field of stereo
television shows and all programs
encoded in Dolby Surround.