BH LK500RiB Guide D'utilisation page 19

STEP 6
Slide the Control Tube Decorative Cover (O) onto Control Tube (F)- see Figure 6-1. Then
thread the lower control wires from the Front Frame (A) through the Control Tube (F). Then
attach the Control Tube (F) and Front Frame (A) with the Truss Hex Screws (K13), Spring
Washers (K14) and Flat Washers (K21), tighten firmly. Attach the Handrail Tube (E) to the
Control Tube (F) with Truss Hex Screws (K16), Spring Washers (K14) and Flat Washers (K15).
O
O
A
L
19
LK500RiB v6