Important Information On; Service Equipment Safety; Safety; Layout Of The Manual - MAHLE ACX150 Manuel D'utilisation

EN | 7 | ACX150/250 | Layout of the manual
scrapping the unit, to drain and recycle
the R134a or R1234yf refrigerant as
required by local legislation.
To resume
installation (there is no need to register
the unit anew on the website) and run the
commissioning
operational checks as required by local
legislation.
3.2 Important information
on service equipment

safety

When using the equipment, the following
operations are not allowed as they might
cause, under
danger for persons and cause permanent
damage to the equipment itself.
- Do not remove or make
unreadable
and/or dangers signs placed
on the equipment and in the
area nearby.
- Do not disable the unit's
safety equipment.
- The electrical system to
which the service equipment
is
configured as provided by
local legislation.
- Only operators or qualified
staff instructed or certified for
the equipment maintenance
can open the equipment. The
equipment
which
electrocution: shut off power
to
servicing/repairing it.
© MAHLE
operation, repeat
trials and
certain circumstances,
labels,
connected must
contains
can
the equipment
3.3
ACX
the
following safety devices:
regular
signs
Failure to observe any of the above
safety
equipment's warranty.
4 Layout of the
be
manual
4.1
parts

cause
before


Safety devices

150/250 is equipped with the
SAFETY PRESSURE SWITCH:
It stops the compressor in case
of excessive pressure.
SAFETY VALVE: The safety
valve opens when the pressure
inside the system reaches a
level higher than the fixed limits.
MAIN SWITCH: Switches the
equipment off by interrupting
the power supply. It is advisable
to pull the power cord plug out
of the mains socket in any case
before starting
work.
ANY TAMPERING WITH THE
ABOVE-MENTIONED SAFETY
DEVICES IS PROHIBITED.
instructions

Use of the manual

This manual is an integral part
of the equipment and must be
kept in the
immediate vicinity
purchaser
This manual shall accompany
the equipment in case this is
passed on to a new user.
maintenance
voids the
equipment's
by the