MAHLE ACX150 Manuel D'utilisation page 6

OTHER PROHIBITIONS
LIMITATIONS: Only use pure R134a or
R1234yf refrigerants, refrain from using
on vehicles containing other types of
refrigerants or mixtures of the two
refrigerants or
Mixture with other types of refrigerant
produces serious
conditioning and cooling systems. Mixed
refrigerants have to be disposed of
according to the current regulations.
Never use ACX equipment with systems
containing compressed air; mixtures of
R134a or R1234yf with air or oxygen may
be potentially flammable.
Do not modify calibration of safety
devices. Do not remove seals of safety
valves and of control systems. Do not use
external tanks or other storage containers
that are not type-approved or without
safety valves.
Make sure the equipment's aeration and
ventilation ports are not obstructed or
covered while the equipment is operating.
HOSE CONNECTIONS:
contain pressurised refrigerant. Before
changing the service couplers, check the
respective pressures
(pressure gauge).
Before connection to a car A/C system, to
an external tank/cylinder, check that the
quick couplers are closed (unscrewed HP
and LP valves).
Scrupulously follow the instructions on
the equipment's display.
AND USE
other refrigerants.
damage to
Hoses may
in the hoses
EN | 6 | ACX150/250 | Safety conditions
QUICK COUPLERS
CLOSING/OPENING:
the
MAINTENANCE/GENERAL CLEANING:
The equipment has to be serviced at the
intervals indicated by the equipment itself.
The service station maintenance has to
be performed
procedures described in this manual and
to the current safety regulations.
Use only MAHLE original parts.
When the equipment requires the drier
filter and the vacuum pump oil to be
changed, you have to be careful in the
replacement.
A/C service station maintenance can be
carried out exclusively by a trained
operator or by a service man of a MAHLE
certified seller.
Do not use chemical agents for the
service station cleaning as they could
attack the material or the surface.
STOP FOR LONG PERIOD: Store the
equipment in a safe place, disconnected
from the mains, away from excessive
temperatures, humidity and the risk of
damaging impact.
Contact the Technical Service to run a
safety shutdown of the equipment, and if
Opening (connect to
the vehicle):
clockwise
Closing (detach from
the vehicle):
counter clockwise
according to
© MAHLE
the