auna Stereo Sonic DAB+ Mode D'emploi page 53

or "MM-DD-YYYY" date display. Select your desired and then press the
ENTER button to confirm.
6. Press the MENU button to exit the menu control.
Auto Update
1. Turn on the unit in DAB mode or FM mode.
2. Press the MENU button to access the menu control.
3. Press the PREVIOUS or NEXT button until "Time" is displayed and then
press the ENTER button.
4. Press the PREVIOUS or NEXT button until "Auto update" is displayed and
then press the ENTER button.
5. Press the PREVIOUS or NEXT button to change between
• "Update from Any": Time/Date will be updated by either DAB or FM
broadcast
• "Update from DAB": Time/Date will be updated by DAB broadcast only
• "Update from FM": Time/Date will be updated by FM broadcast only
• "No update": Time/Date will never be updated by broadcast
6. Select your desired and then press the ENTER button to confirm.
7. Press the MENU button to exit the menu control.
Set Time/Date
1. Turn on the unit in DAB mode or FM mode.
2. Press the MENU button to access the menu control.
3. Press the PREVIOUS or NEXT button until "Time" is displayed and then
press the ENTER button.
4. Press the PREVIOUS or NEXT button until "Set Time/Date" is displayed
and then press the ENTER button.
5. Hour digits will be flashed. Press the PREVIOUS or NEXT button to
change to hour value and then press the ENTER button.
6. Minute digits will be flashed. Press the PREVIOUS or NEXT button to
change to hour value and then press the ENTER button.
7. If 12 hour display is set, "AM or "PM" will be flashed. Press the PREVIOUS
or NEXT button to set AM or PM and then press the ENTER button to
confirm.
8. Then the unit will request to set the date. Follow the similar procedures
as listed above to complete the setup.
9. Press the MENU button to exit the menu control.
LANGUAGE SETUP
You can set the unit's language.
1. Turn on the unit in DAB mode or FM mode.
2. Press the MENU button to access the menu control.
3. Press the PREVIOUS or NEXT button until "Language" is displayed and
then press the ENTER button.
4. Press the PREVIOUS or NEXT button to toggle between different
languages. Select your desired language and then press the ENTER
button to confirm.
EN
53