auna Stereo Sonic DAB+ Mode D'emploi page 48

EN
48
Stereo/Force Mono Selection
When receiving a Stereo FM radio station, press the FM ST. button will
switch between stereo audio and force mono audio.
Displaying FM Station Information
There are several types of information as listed below. To change the
display information press the INFO button repeatedly.
1. Radio Text
Scrolling text which shows information on music titles or program
details provided by the radio station.
2. Program Type (PTY)
Type of program provided by the broadcaster
3. Frequency
Current channel frequency
4. Audio Type
Stereo or Mono
5. Time
Displays the time provided by the radio station.
6. Date
Displays the current date provided by the radio station.
Other fm menu operation
Press the MENU button to access the menu control. Then press the
PREVIOUS or NEXT button for different options as described below.
Scan setting
1. Press the MENU button to access the menu control.
2. Press the PREVIOUS or NEXT button until "Scan setting" is displayed and
then press the ENTER button.
3. Press the PREVIOUS or NEXT button to toggle between "All stations" or
"Strong station" selections and then press the ENTER button confirm.
When "All stations" is selected, all stations will be detected during FM
scanning even if the radio station is noisy. When the "Strong station" is
selected, only the strong stations are detected. Scanning will ignore the
noisy stations.
4. The next time doing a FM scan the unit will search for the stations based
on this confirmed setting.
Audio Setting
1. Press the MENU button to access the menu control.
2. Press the PREVIOUS or NEXT button until "Audio setting" is displayed
and then press the ENTER button.
3. Press the PREVIOUS or NEXT button to toggle between "Stereo allowed"
or "Forced mono" selection and then press the ENTER button confirm.