auna Stereo Sonic DAB+ Mode D'emploi page 45

Manual scan
1. Turn on the unit in DAB mode.
2. Press MENU button to access the menu control.
3. Press the PREVIOUS or NEXT button until "Manual tune" is displayed and
then press the ENTER button.
4. Press the PREVIOUS or NEXT button to select the desired channel
(5A-13F).
5. Press the ENTER button to confirm.
6. To select another channel (5A-13F), press the PREVIOUS or NEXT button
and then press the ENTER button to confirm.
7. When the station is found, press the ENTER button to select.
8. To quit manual scan, press the MENU button.
Tuning
Press the TUNE or TUNE button to display the information of the next
station. Then press the ENTER button to tune to this station within a few
seconds.
Storing DAB Presets
You can save up to 20 DAB stations.
1. Tune to the station you wish to store.
2. Press and hold the MEMORY button to access the menu control. Display
will flash.
3. Press the Preset- or Preset+ button to a preset number that you want to
store. Then press the ENTER button to save.
Recall Stored DAB Presets
Press the Preset- or Preset+ button directly tune to the preset channel.
Or press the [MEMORY] button once. Then press the Preset- or Preset+
button to a preset number that you want to recall and press the ENTER
button to confirm.
To directly recall the preset channel by using the numeric buttons, press the
numeric buttons [1], [2], ..., [0].
For example when the button [3] is pressed and then follow by pressing
the ENTER button, it will tune to E-8 preset channel 3. Or when the button
[1] nd then button [2] are pressed and then follow by pressing the ENTER
button, it will tune to preset channel 12.
Displaying DAB Station Information
There are several types of information as listed below. To change the
display information, press the INFO button or the DISPLAY button on the
remote control repeatedly.
1. Radio Text scrolling
Shows music titles or program details provided by the broadcaster.
EN
45