Table des Matières
Publicité
Janome MS5027 Instruction Manual
Machine Operating Buttons
q Start/stop button
w Up/down needle button
e Speed control lever
Start/stop Button
q Start/stop button
Press the button to start or stop the machine. The machine
starts running slowly for the first few stitches; it then runs at
the speed set by the speed control lever.
NOTE:
The Start/stop button cannot be used when the foot
control is connected to the machine.
Up/down Needle Button
w Up/down needle button
Press this button to bring the needle up or down.
You can set the needle position with this button, up or down
when the machine stops.
Speed Control Lever
e Speed control lever
Sewing speed can be varied by the speed control lever
according to your sewing needs.
To increase sewing speed, slide the lever to the right.
To decrease sewing speed, slide the lever to the left.
www.toews.com
q
w
8
Janome Pink Ribbon
e
MS5027 Owners Manual/ User Guide
Publicité
Table des Matières
