Mechanical Limit Stop Adjustment - Nice SWN 70-24 Manuel D'installation Et D'utilisation

3.7 - Mechanical limit stop adjustment

01. To adjust the limit stop, proceed as follows:
- Close the door
the centre of the switch (B); then tighten the grub screw (C) using
the adjustment tool provided.
This operation makes an initial adjustment
-Open the door to the desired position
- Adjust the OPENING limit stop in the same way and then the
other cam wheels (5) and (6) (if used)
justment device (D).
12 – English
-
Adjustment tool
6
5
4
3
2
1
B
D
C
connection
Safety chain
A
P1
P1
SE
E
SE
E