Cameo CLTS40WW Manuel D'utilisation page 12

DEVICE SETTINGS
Pressing MENU will take you to the selection menu for system settings. Using UP and DOWN, select the menu item "Settings" and confirm
with ENTER. You will then be taken to the sub-menu to set the sub-menu items (Select and adjust by pressing ENTER and UP and DOWN, for
submenu items, see table). Press MENU once more to return to the main display. The main display is automatically activated if no input is
made within about 30 seconds.
Settings
Display = Display lighting
DMX Fail = Operation status with DMX signal interruption
DimCurve = Dimmer Curve
DimResp = Dimmer response
Calibrat = Cross-mode calibration of the colour reproduc-
tion in mixed colours.
DEVICE INFORMATION
Pressing MENU will take you to the selection menu for system settings. Using UP and DOWN, select the menu item "Sys Info" and confirm
with ENTER. You will then be taken to the sub-menu to display the device information. Use the UP and DOWN panels again to select the
desired sub-menu item and then press ENTER to retrieve the information (see table). Press MENU once more to return to the main display.
The main display is automatically activated if no input is made within about 30 seconds.
12
Backlight ON permanently on
Backlight Off deactivation after approx. 30 seconds of
inactivity
Hold last DMX command is held
Blackout activates Blackout
Linear The light intensity increases linearly with the
DMX value.
Exp Adjustment of the light intensity is finer in the
lower DMX value range and coarser in the
upper DMX value range.
Log The light intensity can be adjusted coarsely in
the lower DMX value range, and finely in the
upper DMX value range.
S Curve The adjustment of the light intensity is finer
in the lower and upper DMX value ranges and
coarser in the middle DMX value range.
LED The spotlight responds abruptly to changes in
the DMX value.
Halogen The spotlight behaves in a manner similar to
that of a halogen lamp with gentle changes in
brightness.
Red Adjusting the intensity with values ranging
from 000 to 255
Green Adjusting the intensity with values ranging
from 000 to 255
Blue Adjusting the intensity with values ranging
from 000 to 255
White Adjusting the intensity with values ranging
from 000 to 255