I N S T A L L A T I O N
4.4.3 PC system requirements
Minimum system requirements:
E N
_ Resolution of 1680 × 1050 pixels (22" monitor)
_ Operating system, Windows 8 64 bit
_ 2 GB of free space for the installation
_ 2 × USB 2.0
_ Internet connection
System recommendation:
_ CPU Intel Xeon E5 2.8 GHz
_ 16 GB memory
_ 1 TB free disk space
_ Workstation graphics card with at least 2 GB
memory and OpenGL 4.4
_ Resolution of 1920 × 1080 pixels
4.4.4 Software system requirements
Ceramill software version above version 3.3.X
24
5
Installation
5.1
Transport
▷ For transport, have two persons lift the equip-
ment by the floor plate.
▷ If the packaging is damaged: Promptly notify
the delivering forwarding agent as well as the
dealer.
5.2
Unpacking
The device is delivered in a sturdy carton. A foam
element inside the carton protects the scanner
during transportation.
▷ Upon delivery, immediately check the packaging
for any visible damage.
▷ Open upper folding lid of the carton.
▷ Firstly, lift foam element out of the carton.
▷ Afterwards, remove complete carton by lifting it
upward and away.
▷ Carefully remove device from packaging and
place it down at the intended, prepared work-
station (see Section 5.3).
The scanner accessories are at the bottom
of the packaging.
▷ Check completeness of delivery scope.