Ryobi RHT500R Traduction Des Instructions Originales page 10

Deutsch (Übersetzung der originalen Anleitungen)
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
■ Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool's operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
■ Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■ Use the power tool, accessories and tool bits etc.
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from intended could result
in a hazardous situation.
SERVICE
■ Have your power tool serviced by a qualified
repair person using only genuine replacement
parts. This will ensure that the safety of the power
tool is maintained.
Important: Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME
V Volts
A Amperes
Hz Hertz
W Watt
h Hours
Class II Construction
Wet Conditions Alert
Safety Alert Symbol
Read the Operator's Manual
English (Original instructions)
SYMBOL
Voltage
Current
Frequency (cycles per second)
Power
Time
Double-insulated construction
Do not expose to rain or use in damp locations.
Precautions that involve your safety.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
7 7
HEDGE TRIMMER SAFETY WARNINGS
■ Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving .Make sure
the switch I off when clearing jammed material.
A moment of inattention while operating the hedge
trimmer may result in serious personal injury.
■ Carry the hedge trimmer by the handle with
the cutter blade stopped. When transporting or
storing the hedge trimmer always fit the cutting
device cover .Proper handling of the hedge trimmer
will reduce possible injury from the cutter blades.
■ Keep cable away from cutting area. During
operation the cable may be hidden in shrubs and can
be accidentally cut by the blade.
ADDITION
■ Advice to check the hedge trimmer for foreign
objects, e.g. wire fences.
■ Recommendation for the use of a residual current
device with a tripping current of 30mA or less.
■ Instruction to hold the hedge trimmer properly, e.g.
with both hands if two handles are provided.
EXPLANATION