Registering The Differential Release (Df); Tyres Inflation Pressure; Electric System - GOLDONI JOLLY Serie Mode D'emploi Et D'entretien

5.3.5 Registering the differential release (DF)

Only for models with differentials
The differential lock lever n.1 fig.6 in LOCKED position must have a no take-up
of 2-4 mm (cable).
When the lever is is RELEASED, the wheel release must be completely
executed.
To register the correct travel use registering screw n.2 fig.6

5.3.6 Tyres Inflation Pressure

Tyre
4.00X8"
4.0-10"
5.0X10"
6.5/80X12"
16X6.50-8"
18X6.50-8" Softrac

5.4 ELECTRIC SYSTEM

Always detach the live cable from the battery before working on
the electric system.
- Battery
see fig.11
Check electrolyte level to make sure the battery elements are always covered.
Top up with distilled water as necessary away from naked flames.
Check battery cable clamp tightening performance and grease them with
vaseline. Keep the battery clean and if the machine is to remain inactive for a
long time, remove the battery and store in a cool dry place.
Any work of the battery must be done with extreme care: the
electrolyte is corrosive and the gas generated is flammable.
TYRE INFLATION PRESSURE
50
Pressure
bar
1,1
1,0
1,0
1,2
1,0
1,0
KPa
110
100
100
120
100
100