Registrations And Checks; Registering The Cables; Tyre Inflation Pressure; Specifications - GOLDONI SUPER SPECIAL Serie Emploi Et Entretien

5.3 REGISTRATIONS AND CHECKS

The procedures given below cover the main registrations to be made. They are
quite uncomplicated but, if you encounter problems, contact your closest
Goldoni Technical Assistance Centre.

5.3.1 Registering the cables

Check to be sure that the clutch, throttle, motorstop, brakes, differential lock
cables are in good condition and work correctly.
If their take-up has to be registered, do this with the corresponding adjustment
screws.

5.3.2 Tyre inflation pressure

Tyre
6.5/80x12"
6.5/80x15"

6 SPECIFICATIONS

6.1 SPEED

Gears
Wheels
6./80x12"
6.5/80x15"

6.2 OUTSIDE WHEELBASE

Wheel
6.5/80x12"
6.5/80x15"
TYRE INFLATION PRESSURE
bar
1,2
1,2
SPEED CHART
In km/h - with engine at 3000 Rpm
(Speeds are indicative)
1st 2nd
1,3 2,7
1,5 3,1
OUTSIDE WHEELBASE
(Sizes are indicative - mm)
44
Pressure
1st
3rd 4th
reverse
6,0 12,2 2,8
6,8 13,7 3,2
Width
550 - 680 - 780
490 - 560 - 620
KPa
120
120
2nd
reverse
5,7
6,4