Step 1: Charger Assembly; Step 2: Getting Started With Innovo - Atlantic Therapeutics Innovo Mode D'emploi

STEP 1: CHARGER ASSEMBLY

Select the correct adapter for your country.
1. Align the adapter with the charger. The word "TOP" is
embossed on the charger and the adapters to show the
correct orientation (Fig. 3).
2. Place the "TOP" end of the adapter into the adapter recess,
press the other end firmly into the recess (Fig. 4). The adapter
will click into place.
3. Ensure the adapter is firmly assembled before plugging the
charger into an electrical outlet.
Important:
When disconnecting the adapter from the charger, always hold the
adapter before disengaging the "OPEN" button, to stop the adapter
springing away from the charger.

STEP 2: GETTING STARTED WITH INNOVO

1. Before you start a treatment session, please ensure that the battery is
sufficiently charge d. If the battery charge is low, connect the charger to
the controller and plug it into an electrical socket. You will need to move
the sliders inwards to enable you to do this (Fig. 5). You should charge the
battery for approximately 5 hours from flat. It is fully charged when all 5 bars
of the battery symbol (
should be sufficient to complete approximately 5 sessions.
2. Make sure your skin is clean and free from oils, lotions, moisturisers etc as these
may prevent the Shorts from functioning correctly.
3. We recommend that you wear high-thigh underwear which leaves your buttocks
exposed, as the electrodes need to be in full contact with your skin to deliver
®
the INNOVO treatment programmes successfully (Fig. 6). Alternatively, you can
also use INNOVO ®
starting a treatment session.
4. Follow this instruction manual and the Quick Start Guide carefully to ensure you
set up and apply INNOVO
the information on restorethefloor.com.
) on the display screen are visible. A full charge
without underwear. It is advised that you use the toilet before
® correctly. We strongly recommend that you review
Fig. 3
Fig. 3
Fig. 4
Fig. 4
®
Fig. 5
Fig. 5
Fig. 6
Fig. 6
9