Additional Product Functions - Atlantic Therapeutics Innovo Mode D'emploi

ADDITIONAL PRODUCT FUNCTIONS

Using the Neck Strap
1. When using the neck strap, attach the clip to the connector at the top of the
controller (Fig. 34). Ensure the controller is attached with the screen facing
away from your body.
2. The neck strap is equipped with a safety-clip which pops open if there is a
sudden, forceful pull on the neck strap. If this happens, align the two halves
of the clip (Fig. 35) and simply push them back together until the oval button
clicks into place. If it does not "click" together, you may have one side of the
clip back-to-front. Turn it around and try again.
Using the Keylock Function during your treatment session
When you have set the intensity to a level you find comfortable, press and hold the
Information Button (
This "locks" the Increase and Decrease Intensity buttons, so the intensity cannot
be changed accidentally. The other buttons will still function as normal. If you wish
to increase or decrease the intensity, you can deactivate the Keylock Function by
again pressing the Information button for two seconds. This function only remains
active during the session in which it is activated. Once the treatment session is
complete, the Keylock Function deactivates automatically.
Note: Keylock cannot be activated while the controller is paused.
Mute Function
If you want to switch off your controller's sound effects, press and hold both the Up
( ) and Down ( ) Scroll buttons for 1 second (Fig. 37). This will activate the
Mute Function. Deactivate the Mute Function by again pressing both the Up and
Down Scroll buttons for 1 second.
Note: The Mute Function is overruled if there is an electrode contact problem (see
page 21) or if there is a controller error message (see page 8).
Reset Data
®
The INNOVO controller can store the data from 90 treatment sessions to enable
you to review your treatment progress. Once this is reviewed, the controller can
be reset and the data cleared by pressing and holding the Decrease Intensity
button ( ) and the Information button (
seconds, the Total Treatment Time will begin to flash on screen and when this
resets to 00:00, your data has been cleared. This function will not work while a
treatment session is in progress. If you don't reset the data after 90 sessions, you
can still continue to use your product: in this instance the data from the 91st and
subsequent sessions will be written over the data for session #1, #2 etc.
) for two seconds to activate the Keylock Function (Fig. 36).
) for 4 seconds (Fig. 38). After 2
Fig. 33
Fig. 34
Fig. 34 Fig. 35
Fig. 35 Fig. 36
Fig. 36
Fig. 37
Fig. 37 Fig. 38
17