In-Programme Information - Atlantic Therapeutics Innovo Mode D'emploi

IN-PROGRAMME INFORMATION

Your INNOVO ® controller stores three pieces of data from every session you run. This allows you to monitor your
treatment progress if you wish:
a) The maximum intensity for each session.
b) The average intensity for each session.
c) The duration of each session.
This information can be reviewed in 2 different ways - either by reviewing all 3 parameters in a single session or by
reviewing one specific parameter over a number of sessions.
Note: This information cannot be accessed while a programme is running.
Review by Session
1. Access the list of treatment sessions by pressing either the Up or Down Scroll buttons
(Fig. 45).
• By pressing the Scroll Up button (
oldest to the most recent, starting with the first treatment session you completed,
then the second, then the third etc.
• By pressing the Scroll Down button (
completed treatment session first, then the session completed before that, then
before that again, etc.
2. When you have highlighted the session you wish to review, the maximum intensity
level for that session appears on screen (Fig. 46). This information remains on screen
for 3 seconds and will then revert back to the start screen, unless you press the
Information button again.
3. Press the Information button once to display the average intensity of the selected
session (Fig. 47).
4. Press the Information button twice to display the duration of the selected session (Fig.
48).
5. Press the Information button three times to display the programme used for the
selected session (Fig. 49).
Review by Parameter
1. Access the list of treatment sessions by pressing either the Up or Down Scroll button.
• By pressing the Scroll Up button you will access the list of sessions from the
oldest to the most recent, starting with the first treatment session you completed,
then the second, then the third etc.
• By pressing the Scroll Down button you will access your most recently completed
treatment session first, then the session completed before that, then before that
again, etc.
2. When you have highlighted the session you wish to review, press the Information
button until you find the parameter you wish to review. For example, Fig. 50 shows the
maximum intensity in session #1.
3. Next, press the Up Scroll button to display the same parameter in the next session
(i.e. the maximum intensity in sessions #2, #3 etc.- Fig. 51 & Fig. 52). Or press the
Down Scroll button to display the same parameter in the previous session. This
information remains on screen for 3 seconds and will then revert back to the start
screen, unless you press the Scroll Buttons or the Information button again.
Note: If you wish to review the average intensity for each session instead of the
maximum intensity; when you have highlighted the session you wish to review,
press the Information button twice to see the average intensity for session #1.
Then use the Scroll Buttons to see the average intensity in session #2, #3 etc.
Press the Information button three times to see the duration of each session you
wish to review.
) you will access the list of sessions from the
) you will access your most recently
Fig. 44
Fig. 45
Fig. 45
Fig. 46
Fig. 46
Fig. 47
Fig. 48 Fig. 47
Fig. 49
Fig. 48
Fig. 50
Fig. 49
Fig. 50
Fig. 51
Fig. 51
Fig. 52
19