Atlantic Therapeutics Innovo Mode D'emploi page 28

Description of the controller's symbols
There are a number of technical markings on your controller. These can be explained as follows:
The controller and shorts are manufactured for Atlantic Therapeutics Ltd., Parkmore Business Park
West, Galway, H91 NHT7, Ireland.
The controller requires 1 x 7.2V (6 x 1.2 AAA) (NiMH) DC battery pack; DC is indicated by the symbol:
Power ( P ): Maximum power output measured in Watts (W) into a 500 load.
Frequency ( F ): Number of pulses output by the controller per second, measured in Hertz (Hz).
IP22: Ingress Protection Rating
VXX: Software version.
This symbol means "Attention, read the accompanying documents"
This symbol means type BF applied parts (Shorts).
This symbol on your controller is to indicate conformity to the requirements of the Medical Device
Directive (93/42/EEC). 0086 is the number of the notified body (BSI). The CE mark applied also indicates
0086
that this equipment complies with the requirements of the ROHS Directive (2011/65/EU) for the
Restriction of Hazardous Substances in Electrical and Electronic Equipment.
SN stands for 'serial number'. The serial number specific to this product appears on a label on the back of the
controller. The letter preceding the number indicates the year of manufacture, where "W" denotes 2017, "X"
denotes 2018 etc..
The Shorts' batch number is represented on its packaging and on the shorts (rear of the socket), by the number
corresponding with the LOT symbol.
At the end of the product lifecycle, do not throw this product or the batteries into the normal household
garbage, but bring it to a collection point for the recycling of electronic equipment.
Some product materials can be re-used if you bring them to a recycling point. By re-using some parts or
raw materials from used products you make an important contribution to the protection of the
environment. Please contact your local authorities if you need more information about collection points in
your area.
Waste Electrical and Electronic Equipment can have potentially harmful effects on the environment.
Incorrect disposal can cause harmful toxins to build up in the air, water and soil and can be harmful to
humans. The CE mark applied also indicates that this equipment complies with the requirements of the
ROHS Directive (2011/65/EU) for the Restriction of Hazardous Substances in Electrical and Electronic
Equipment.
Description of the packaging symbols:
There are a number of technical markings on your pack. These can be explained as follows:
This symbol means "Keep dry".
The product packaging (box, sleeve and insert) can be recycled
This symbol means "Use by".
28