WARNING: The heating process is activated only after the water level that is required to protect
the resistances in the boilers has been reached.
If the filling process is activated in the boiler for more than 15 consecutive seconds, the heating
process is deactivated, in order to protect the resistances. Make sure that the water mains is
connected and enabled or that the water reservoir is full and enabled.
10.1 HEATING PRIORITIES
The system provides for selecting the heating priorities.
In the idle-off state, click on the
B and, by subsequently entering the password: 66666, the heating priorities for the boilers
Click on
can be selected according to the following parameters:
11. ALARMS
A flashing triangle above the current time on the display means that there is an alarm condition.
symbol to access the "Technical Programming" menu:
"TECHNICAL PROGRAMMING" MENU SCREEN
A
C
A FACTORY parameters (manufacturer password)
B TECHNICAL parameters
C cancel and exit
- COFFEE/STEAM - choose to give the heating priority to the coffee boiler (the
coffee resistance is activated and, subsequently, the steam is activated).
- STEAM/COFFEE - choose to give the heating priority to the steam boiler (the
steam resistance is activated and, subsequently the coffee is activated).
- COFFEE=STEAM - there is no priority, but the heating systems work
simultaneously.
B
14