Turning On The Machine - Izzo Alex Duetto Evo Manuel D'utilisation Et De Maintenance

To access the "Technical Menu", after having clicked on
The following is possible from this menu:
- manage the heating priorities (section 10.1)
- set the filling timeout level
- change menu access password
To cancel the action and return to the initial "idle-off" screen, click on
The FACTORY

6.2 TURNING ON THE MACHINE

FIRST USE WITH CONNECTION TO RESERVOIR: Fill the reservoir up to the maximum notch to
allow the water to enter the boilers. Repeat the procedure to refill the container. (Par. 7.1.1).
FIRST USE WITH CONNECTION TO WATER MAINS: Make sure that the water mains
connection has been created. Turn the tap, positioned
under the drip tray (as shown below).
The machine manages the heating process for the steam boiler and the coffee boiler only after
they have been filled.
N.B.: The machine is preset for a reservoir connection.
When using the machine for the first time, if the water mains connection is chosen, an acoustic
warning signal will go off. From the display, set the water from "mains" input and restart the
machine: from the home screen (page 3) press the
turn it back on.
From the IDLE-OFF screen, once the ON button
providing information on: date, temperature, resistance, and selected page (in this case, page 1).
parameters are exclusively reserved for the manufacturer.
C – cancel and exit
(B), the password: 66666 must be entered.
button to turn it off, then again
(B) is pressed, the machine passes to IDLE-ON,
(C).
to
9