Ironing Without Steam; Spray Function - Philips AZUR GC4820 Mode D'emploi

EnGlish
12

ironing without steam

1 Set the steam control to position 0 (= no steam).
2 Set the required ironing temperature (see chapter 'Preparing for use',
section 'Selecting the temperature and steam setting').
steam ironing
1 Make sure that there is water in the water tank.
2 Set the required ironing temperature (see chapter 'Preparing for use',
section 'Selecting the temperature and steam setting').
3 Put the iron on the stand.
4 Put the mains plug in the wall socket.
The iron starts heating up. As soon as the water in the water tank is
,
hot enough for steam ironing, the temperature light goes out.
5 Set the appropriate steam setting (see chapter 'Preparing for use',
section 'Selecting the temperature and steam setting').
Note: The iron starts to produce steam as soon as it reaches the set
temperature.
Note: Steam ironing is only possible at higher ironing temperatures
(temperature settings 2 to MAX).
Features

spray function

You can use the spray function to remove stubborn creases at any
temperature.
1 Make sure that there is water in the water tank.